Feathered Wing Royalty Crest, Gold Metallic, Copper, and Black Emblem patch, DIY, Embroidered Applique Iron On Patch, Size 6"
DIY, Embroidered Applique Iron On Patch
**** How to apply your patch ****
Our embroidered patches can be ironed onto anything you can iron: shirts, jeans, hats, blouses, pants, skirts, etc.
Make your clothes and accessories unique!
Are you creative? With a heat press or an iron, you can create a new look instantly. It's soooo easy!
Heat seal to polyester/cotton fabrics. Do not apply to rainwear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to the garment and is washable, dryable and dry cleanable. For machine washing, turn garment inside-out before washing and drying.
Iron on instructions for embroidered patches using an iron:
Step 1: Set your iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION!
Step 2: Place embroidered patch in the desired position and place a Teflon sheet on top.
Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.
Step 4: Turn the garment inside-out and repeat steps 2 & 3.
Step 5: Allow the patch to cool down.
Instructions for using a Heat Press:
Step 1: Set your heat press to 350 degrees.
Step 2: Place your embroidered patch in the desired position and place a Teflon sheet on top.
Step 3: Press the garment for 12 seconds.
Step 4: Increase temperature to 375 degrees. Turn the garment inside-out and press for 10 more seconds.
Step 5: Allow the embroidered patch to cool down.