Add some nostalgia to your garment with this rubiks cube, embroidered patch.
This 3-inch custom made iron-on embroidered patch
This patch is HOTTTT so get it while you can!!
Patch has adhesive on the back and is ready to be sealed with your heat press or iron (without steam) and can also be sewn on.
Thanks so much for stopping by!
**** How to apply your patch ****
Our embroidered patches can be ironed onto anything you can iron: shirts, jeans, hats, blouses, pants, skirts, etc.
Make your clothes and accessories unique!
Are you creative? With a heat press or an iron, you can create a new look instantly. It's soooo easy!
Heat seal to polyester/cotton fabrics. Do not apply to rainwear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to the garment and is washable, dryable and dry cleanable. For machine washing, turn garment inside-out before washing and drying.
Iron on instructions for embroidered patches using an iron:
Step 1: Set your iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION!
Step 2: Place embroidered patch in the desired position and place a Teflon sheet on top.
Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.
Step 4: Turn the garment inside-out and repeat steps 2 & 3.
Step 5: Allow the patch to cool down.
Instructions for using a Heat Press:
Step 1: Set your heat press to 350 degrees.
Step 2: Place your embroidered patch in the desired position and place a Teflon sheet on top.
Step 3: Press the garment for 12 seconds.
Step 4: Increase temperature to 375 degrees. Turn the garment inside-out and press for 10 more seconds.
Step 5: Allow the embroidered patch to cool down.